Illustration 7.
निम्नलिखित विवरण से एक विवरण-पत्र बनाइए और दिखाइए (अ) प्रयुक्त सामग्री की लागत, (ब) मूल लागत (स) कारखाना उपरिव्यय,
(द) कुल लागत (य) प्रतिशत जो कारखाना उपरिव्ययों का उत्पादक मजदूरी से है ,(र) प्रतिशत जो सामान्य उपरिव्यय का कारखाना परिव्यय से है
From the following particulars, you are required to prepare a statement showing (a) The cost of material consumed, (b) Prime cost, (c) Works cost, (d) Total cost, (e) The percentage of works on cost to productive wages and (1) The percentage of general on cost to works cost:
कम्पनी एक बड़े प्लाण्ट के लिए टेण्डर भेजने वाली है। परिव्ययांकन विभाग अनुमान लगाता है कि आवश्यक सामग्री की लागत 52,000 होगी तथा प्लान्ट बनाने वाले कर्मचारियों की मजदूरी 31,200 होगी लाभ के अनुसार बनेगा। टेण्डर किस राशि का बनेगा यदि यह उपर्युक्त प्रतिशतों पर आधारित हो?
The company is about to send a tender for a large plant. The Costing Department estimates that the materials required would cost 52,000 and the wages to workmen for making the plant would cost 31.200. The tender is to be made at a net profit of 20% on the selling price. Show what the amount of tender would be if based on the above percentages.
BCom 2nd year cost accounting Determination tender price Study material notes in Hindi
स्थिर एवं परिवर्तनशील व्ययों के ज्ञात होने पर निविदा या निर्ख मूल्य का निर्धारण-जैसा कि लागत के तत्व, अध्याय में पढं चुके हैं । कि परिवर्तनशील के आधार पर लागत के निम्नलिखित भेद हो सकते हैं
()स्थिर लागत, (2) परिवर्तनशील लागत. ३) अर्ध-परिवर्तनशील लागत
स्थिर व्ययों पर उत्पादन की मात्रा घटाने या बढ़ाने से काई वेतन, आदि। अतः इनके सम्बन्ध में प्रश्न में जब तक स्पष्ट निर्देश न हो. इन्हें पूर्ववत् ही माना जाता है।
स्थिर व्ययों पर उत्पादन का मात्रा घटाने या बढांने से कोई प्रभाव नहीं पड़ता जैसे फैक्टरी का किराया, मैनेजर का परिवर्तशील व्ययों का उत्पादन की मात्रा से सीधा सम्बन्ध होता है अर्थात् इनकी रकम उत्पादन का मात्राअनुसार हा आनुपातिक रूप से कम या अधिक होती है। यदि इन व्ययों के अनुपात से कम या अधिक हान का स्पष्ट उसके अनुसार ही समायोजन कर लेना चाहिए।
अर्ध परिवर्तनशील व्ययों का कछ भाग तो स्थिर प्रकति का होता है तथा कुछ परिवर्तनशील प्रकृति का होता है। अर्थात् इस प्रकार के व्यय परिवर्तनशीलता तो रखते हैं किन्त उत्पादन के साथ उनका प्रत्यक्ष आनुपातिक सम्बन्ध न होकर अनुपात से कम परिवर्तनशीलता होती है। इनके सम्बन्ध में स्पष्ट निर्देश दिये हुए होते हैं।
जब प्रश्न में लागत सम्बन्धी सूचनाएं उपर्युक्त आधार पर दी गई हों तो प्रश्न में दिए निर्देशों को ध्यान में रखते हुए ही टेण्डर मूल्य की गणना की जाती है।
निम्नलिखित उदाहरणों की सहायता से ऐसी परिस्थितियों में टेण्डर मल्य का निर्धारण भली प्रकार स्पष्ट हो जायेगा।
Table of Contents
Bcom 2nd year cost accounting Determination tender price Study material notes in Hindi
Illustration 8.
निम्नांकित समंक एक कारखाने के 2018 वर्ष के लिए हैं
The following data is given about a factory for 2018:
उत्पादन (Production): 50,000 units
प्रयुक्त सामग्री (Materials consumed) 75,000
प्रत्यक्ष मजदूरी (Direct Wages) 50,000
परिवर्तनशील उत्पादन व्यय (Variable Production Expenses) 1,00,000
परिवर्तनशील विक्रय व्यय (Variable Selling Expenses) 2,00,000
स्थिर व्यय (Fixed Expenses) 75,000
कुल उत्पादन 50,000
इकाइयाँ तथा विक्रय 6,00,000 ₹ (Total output 50,000 units and Sales ₹6,00,000)
यह आशा है कि 2019 में (It is expected that in 2019): ।
- कारखाने में 1,00,000 इकाइयों का उत्पादन होगा (The factory will produce 1,00,000 units)
- सामग्री का मूल्य 33% बढ़ जायेगा (Prices of materials will goupby33%)
- विक्रेताओं को कमीशन की दर में वृद्धि एवं विस्तृत विज्ञापन के कारण परिवर्तनशील विक्रय व्यय की दर में 25% की वृद्धि हो जायेगी।
(There will be an increase of 25% of variable selling expenses rate due to increase in the rate of
commission to salesman and extensive advertising)
- स्थिर व्यय 25,000र से बढ़ जायेगा (Fixed expenses willincrease by ₹25,000) गणना करें (Calculate):
1.2019 में प्रति इकाई लागत क्या होगी यदि 1,00,000 इकाइयों के उत्पादन पर आधारित हो?
(What would be the cost p.u. in 2019 based on a production of 1,00,000 units ?)
- यदि बिक्री पर 2018 की दर पर ही लाभ बनाये रखना चाहें तो 2019 में विक्रय मूल्य क्या होगा?
(if it is desired to maintain the same rate of profit on sales as in the 2018 , what would be the selling price in 2019 ?
BCom 2nd year cost accounting Determination tender price Study material notes in Hindi
Ilustration 9.
मि० विभव के पास एक लघु उपस्कर कारखाना है। वह एक प्रमापित आकार के लघु डाइनिंग टेबल के निर्माण में विशिष्टता हासिल करता है जिसका वह 15,000 प्रति वर्ष निर्माण कर सकता है । वर्ष 2017-2018 में प्रति टेबल आंकलित लागत निम्न प्रकार है जब उसके 10,000 टेबल का निर्माण किया एवं बेचा
Mr. Vibhav has a small furniture factory. He specialises in the manufacture of small dining table of standard size of which can make 15,000 a year. The cost per table worked out as under for the year 2017-18 when he made and sold 10,000 tables:
Materials 30
Labour 10
Fixed overhead 50% of Materials 15
55
मूल्य का निर्धारण उपरोक्त कुल लागत में 10% प्रमापित लाभ जोडंकर किया जाता है वर्ष 2018-2019 में साम्रगी की लागत में कमी होने के कारण कल आकलित लागत इस प्रकार थी
Prices are fixed by adding a standard margin of 10% to the total cost arrived at as above. In 2018-19 due to fall in the cost of materials, total cost worked out was as under:
Materials 20
Labour 10
Fixed overhead 50% of Materials 10
40
मि० विभव ने लागत का 10% प्रमापित लाभ बनाये रखा। बिक्री स्तर वर्ष 2017-18 के ही जैसा था। आपको कहा गया है – वर्ष 2018-2019 के लिए लाभ व हानि का निर्धारण करना (ii) वर्ष 2017- 2018 में अर्जित लाभ व हानि की राशि लेते हुए 2018 -2019 के लिए चार्ज किए जाने वाले मूल्य निर्धारित करते है ।
Mr vibhav maintained his standard margin of 10% on the cost of sales . sales were at the same level as in 2017.2018 you are asked to : (i) Determine profit or loss for the year 2018/ 19 (ii) Compute the Price which should have been charged in 2018- 2019 to yeield the smae profit or loss n the year 2017 – 2018
Bcom 2nd year cost accounting Determination tender price Study material notes in Hindi